Fix a Leak 237 ml for pool and spa

Hot Tub and Spa Leaks

• Determine water loss in a 24-hour period. Fill spa to the original water level.
• Immerse bottle in hot water for 15 minutes. Shake well before use. Remove all the cartridge filters.
• For the entirety of the 8 oz bottle into the filter intake or directly into the spa.
• Day One: Run the spa for 4-6 hours alternating between the low and high speed jets. This step requires supervision. If the spa has only one speed, run the jets in 15 minute on/off increments for a total of 4-6 hours.
• Day Two: Brush the bottom of the spa before following the same steps as Day One.
• Once comfortable the leak has stopped 48 hours with the spa off is required to confirm no further water loss or dripping.
• Drain the spa after 48 hours as long as night temperatures remain above 4°C.
• Rinse and wipe down the sides with a warm soft cloth to remove any residue that may be present on the spa surface.
• If not done properly a white residue will remain.
• Allow the spa to sit empty for 4-7 days.

The draining process allows air to get to the inside of the plumbing helping the product to cure and creating a longer lasting seal

For Pool Leaks

Fix A Leak is a blended-concentrated material designed to seal minor leaks in swimming pools, losing up to 1 inch in a 24 hour period. Fix A Leak is effective for leaks up to 1/8 inch in diameter. One 32 oz. size bottle is good for  100,000 liters.

he product is used mainly for leaks in the plumbing where you must provide the circulation for the product to get to the location of the leak. It is the pressure that will force the product through the leak in the pipe. Fix A Leak can be effective for hairline crack leaks on the floor of a concrete or gunite pool. The product is heavier than water and will eventually settle to the bottom of the pool.

Fix a leak can be used for pinhole leaks in inground vinyl liner pools.